Intake manifold for BMW 1500-2000CS 1800 (1965)
This Intake manifold technical drawing provides a detailed breakdown of the assembly for the 1500-2000CS 1800. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1965.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 02 | Washer | 8,4X16X1,6-ZNNV | 7 | 07119907030 | Shop at ECS Tuning | |||||
| 02 | Washer | 1 | 11610643134 | $0.30 | Shop at ECS Tuning | |||||
| 03 | Hex nut wiht flange | M8 | 8 | 11611713432 | $0.43 | ENDED | Shop at ECS Tuning | |||
| 05 | Gasket ring | A18X22-AL | 1 | 07119963300 | $0.57 | Shop at ECS Tuning | ||||
| 07 | Connector | M18X1,5/18MM | 1 | 09/1963 | 11/1968 | 11120543338 | $20.06 | Shop at ECS Tuning | ||
| 09 | Stud bolt | M6X18 | 1 | 02/1965 | 08/1971 | 07119908244 | ENDED | Shop at ECS Tuning | ||
| 09 | Stud bolt | M 6 X 28 | 1 | 02/1965 | 08/1971 | 07119908257 | ENDED | Shop at ECS Tuning | ||
| 11 | Stud bolt | M6X25-ZN | 2 | 02/1965 | 08/1971 | 07129908100 | $0.20 | Shop at ECS Tuning | ||
| 12 | Clamp | 1 | 11610643018 | ENDED | Shop at ECS Tuning | |||||
| 15 | Hex bolt | M6X12-8.8-ZNNIV | 2 | 07119905524 | $0.27 | Shop at ECS Tuning | ||||
| 16 | Gasket ring | A6.5X9.5-CU | 2 | 07119963034 | $0.70 | Shop at ECS Tuning | ||||
| according to choice | ||||||||||
| 17 | Stud bolt | M 8 X 45 | 2 | 07119908333 | ENDED | Shop at ECS Tuning | ||||
| 17 | Stud bolt | M8X45 | 2 | 07119908334 | ENDED | Shop at ECS Tuning | ||||
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 1500-2000CS 1800 Intake manifold?
- This technical diagram illustrates the Intake manifold within the Engine group for the 1500-2000CS 1800 produced during 1965. It provides a detailed exploded view of the components, identifying key parts such as the Washer (Part #07119907030).
- Which models use the hardware listed in this Intake manifold?
- The hardware and components featured in the Intake manifold are specific to the 1500-2000CS 1800 produced during 1965. These technical specifications ensure that parts like the Washer (07119907030) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Intake manifold assembly?
- Each item in the Intake manifold corresponds to the numbered list below the illustration. For the 1500-2000CS 1800, you can identify the Washer by locating its position on the schematic, which then links to the official BMW part number 07119907030 for the Engine section.