Alternator suspension bracket for BMW 2500-3.3Li 2800 (1969)
This Alternator suspension bracket technical drawing provides a detailed breakdown of the assembly for the 2500-3.3Li 2800. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1969.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 04 | Protection cap | 1 | 08/1968 | 02/1977 | 12311350280 | ENDED | Shop at ECS Tuning | |||
| 06 | Self-locking hex nut | M8 | 1 | 03/1987 | 07129922714 | $0.17 | ENDED | Shop at ECS Tuning | ||
| 06 | Self-locking hex nut | M8-8-ZNNI SI | 1 | 07129906196 | $1.60 | Shop at ECS Tuning | ||||
| 07 | Washer | A8,4X25 | 1 | 07147201571 | $0.20 | Shop at ECS Tuning | ||||
| 08 | Adjusting bar | 1 | 08/1968 | 02/1977 | 12311266121 | $1.74 | ENDED | Shop at ECS Tuning | ||
| 09 | Woodruff key | 3X3,7 | 1 | 07119951430 | $1.21 | Shop at ECS Tuning | ||||
| 10 | Hex bolt | M8X40-ZNNIV SI | 1 | 07119905549 | $1.05 | Shop at ECS Tuning | ||||
| 11 | Fan wheel | 1 | 12311350199 | $14.54 | Shop at ECS Tuning | |||||
| 12 | Fillister head self-tapping screw | ST5,5X13 | 2 | 07119907770 | $0.11 | ENDED | Shop at ECS Tuning | |||
| 13 | Voltage regulator | 12 VOLT | 1 | 08/1968 | 02/1977 | 12321350052 | $128.23 | Shop at ECS Tuning |
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 2500-3.3Li 2800 Alternator suspension bracket?
- This technical diagram illustrates the Alternator suspension bracket within the Engine electrical system group for the 2500-3.3Li 2800 produced during 1969. It provides a detailed exploded view of the components, identifying key parts such as the Protection cap (Part #12311350280).
- Which models use the hardware listed in this Alternator suspension bracket?
- The hardware and components featured in the Alternator suspension bracket are specific to the 2500-3.3Li 2800 produced during 1969. These technical specifications ensure that parts like the Protection cap (12311350280) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Alternator suspension bracket assembly?
- Each item in the Alternator suspension bracket corresponds to the numbered list below the illustration. For the 2500-3.3Li 2800, you can identify the Protection cap by locating its position on the schematic, which then links to the official BMW part number 12311350280 for the Engine electrical system section.