Carburetor cap/piston/float for BMW 2500-3.3Li 2800 (1969)
This Carburetor cap/piston/float technical drawing provides a detailed breakdown of the assembly for the 2500-3.3Li 2800. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1969.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Insulator | 2 | 08/1968 | 02/1977 | 13111253035 | $35.65 | ENDED | Shop at ECS Tuning | ||
| 02 | Retainer spring | 2 | 13111253004 | ENDED | Shop at ECS Tuning | |||||
| 03 | Screw | 2 | 08/1968 | 02/1977 | 13111253005 | ENDED | Shop at ECS Tuning | |||
| 04 | Throttle lever | 2 | 13111253003 | ENDED | Shop at ECS Tuning | |||||
| 05 | Shim | 2 | 13110539204 | $3.63 | ENDED | Shop at ECS Tuning | ||||
| 06 | Throttle lever | 2 | 13111253014 | ENDED | Shop at ECS Tuning | |||||
| 07 | Spacer bush | 2 | 13111253016 | ENDED | Shop at ECS Tuning | |||||
| 08 | Gasket | 2 | 13111253025 | ENDED | Shop at ECS Tuning | |||||
| 10 | Gasket | 2 | 13111253026 | ENDED | Shop at ECS Tuning | |||||
| 11 | Lever | 2 | 08/1968 | 05/1971 | 13111263692 | ENDED | Shop at ECS Tuning | |||
| 11 | Lever | 2 | 08/1968 | 02/1977 | 13111255995 | $16.07 | ENDED | Shop at ECS Tuning | ||
| 12 | Hex nut | M8X1 | 2 | 13541267664 | $1.55 | ENDED | Shop at ECS Tuning | |||
| 13 | Fillister-head screw | 8 | 13111260426 | ENDED | Shop at ECS Tuning | |||||
| 15 | Fillister head screw | 2 | 13111253001 | ENDED | Shop at ECS Tuning |
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 2500-3.3Li 2800 Carburetor cap/piston/float?
- This technical diagram illustrates the Carburetor cap/piston/float within the Fuel preparation system group for the 2500-3.3Li 2800 produced during 1969. It provides a detailed exploded view of the components, identifying key parts such as the Insulator (Part #13111253035).
- Which models use the hardware listed in this Carburetor cap/piston/float?
- The hardware and components featured in the Carburetor cap/piston/float are specific to the 2500-3.3Li 2800 produced during 1969. These technical specifications ensure that parts like the Insulator (13111253035) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Carburetor cap/piston/float assembly?
- Each item in the Carburetor cap/piston/float corresponds to the numbered list below the illustration. For the 2500-3.3Li 2800, you can identify the Insulator by locating its position on the schematic, which then links to the official BMW part number 13111253035 for the Fuel preparation system section.