Drive shaft,univ.joint/center mounting for BMW 1500-2000CS 1800 (1969)
This Drive shaft,univ.joint/center mounting technical drawing provides a detailed breakdown of the assembly for the 1500-2000CS 1800. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1969.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Bump stop | 1 | 26111100891 | $7.81 | Shop at ECS Tuning | |||||
| 02 | Cap | 1 | 26113648115 | ENDED | Shop at ECS Tuning | |||||
| 03 | Lock Ring | 28X1,2 DIN472 | 1 | 33307745110 | $0.51 | Shop at ECS Tuning | ||||
| 04 | Ball joint | 1 | 26111100391 | $6.85 | ENDED | Shop at ECS Tuning | ||||
| 05 | Guide bush | 1 | 26111100389 | $6.27 | ENDED | Shop at ECS Tuning | ||||
| 07 | Hex bolt | M10X61 | 8 | 09/1965 | 01/1972 | 26111102144 | $2.44 | Shop at ECS Tuning | ||
| 08 | Compression spring | 1 | 26113648104 | $6.95 | ENDED | Shop at ECS Tuning | ||||
| 09 | Universal joint | D=76MM/10 | 1 | 09/1965 | 01/1972 | 26111106113 | $96.40 | Shop at ECS Tuning |
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 1500-2000CS 1800 Drive shaft,univ.joint/center mounting?
- This technical diagram illustrates the Drive shaft,univ.joint/center mounting within the Drive Shaft group for the 1500-2000CS 1800 produced during 1969. It provides a detailed exploded view of the components, identifying key parts such as the Bump stop (Part #26111100891).
- Which models use the hardware listed in this Drive shaft,univ.joint/center mounting?
- The hardware and components featured in the Drive shaft,univ.joint/center mounting are specific to the 1500-2000CS 1800 produced during 1969. These technical specifications ensure that parts like the Bump stop (26111100891) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Drive shaft,univ.joint/center mounting assembly?
- Each item in the Drive shaft,univ.joint/center mounting corresponds to the numbered list below the illustration. For the 1500-2000CS 1800, you can identify the Bump stop by locating its position on the schematic, which then links to the official BMW part number 26111100891 for the Drive Shaft section.