Drive shaft,univ.joint/center mounting for BMW 2500-3.3Li 2800 (1969)
This Drive shaft,univ.joint/center mounting technical drawing provides a detailed breakdown of the assembly for the 2500-3.3Li 2800. It includes part names, part numbers and all associated mounting hardware for vehicles produced between 1969.
| No. | Description | Supp. | Qty | From | Up To | Part Number | Price | Notes | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Bump stop | 1 | 08/1968 | 07/1976 | 26111100891 | $7.81 | Shop at ECS Tuning | |||
| 02 | Cap | 1 | 08/1968 | 07/1976 | 26113648115 | ENDED | Shop at ECS Tuning | |||
| 03 | Lock Ring | 28X1,2 DIN472 | 1 | 08/1968 | 07/1976 | 33307745110 | $0.51 | Shop at ECS Tuning | ||
| 04 | Ball joint | 1 | 08/1968 | 07/1976 | 26111100391 | $6.85 | ENDED | Shop at ECS Tuning | ||
| 05 | Guide bush | 1 | 08/1968 | 07/1976 | 26111100389 | $6.27 | ENDED | Shop at ECS Tuning | ||
| 06 | Washer | 17 | 1 | 08/1968 | 07/1976 | 07119931687 | $0.13 | Shop at ECS Tuning | ||
| 07 | Compression spring | 1 | 08/1968 | 07/1976 | 26113648104 | $6.95 | ENDED | Shop at ECS Tuning | ||
| 08 | Universal joint | D=96MM/10 | 1 | 08/1968 | 02/1977 | 26111109714 | $70.93 | ENDED | Shop at ECS Tuning | |
| 08 | Spacer | 7,5MM | 1 | 08/1968 | 02/1977 | 26111109907 | $10.79 | ENDED | Shop at ECS Tuning | |
| 09 | Hex bolt | M12X1,5X65 | 6 | 07119914649 | ENDED | Shop at ECS Tuning | ||||
| 09 | Hex bolt | M10X70 | 6 | 08/1968 | 02/1977 | 26111108506 | $5.76 | ENDED | Shop at ECS Tuning | |
| 11 | Spacer | 7,5MM | 6 | 02/1969 | 02/1977 | 26111109907 | $10.79 | ENDED | Shop at ECS Tuning | |
| 12 | Hex nut | 10 | 26111204183 | $0.30 | ENDED | Shop at ECS Tuning | ||||
| 13 | Fillister-head screw | M10X25 | 4 | 26111101015 | $0.91 | Shop at ECS Tuning |
Notes
- ENDED = the part has been discontinued (no longer available).
See Also
Frequently Asked Questions
- What assembly is shown in the BMW 2500-3.3Li 2800 Drive shaft,univ.joint/center mounting?
- This technical diagram illustrates the Drive shaft,univ.joint/center mounting within the Drive Shaft group for the 2500-3.3Li 2800 produced during 1969. It provides a detailed exploded view of the components, identifying key parts such as the Bump stop (Part #26111100891).
- Which models use the hardware listed in this Drive shaft,univ.joint/center mounting?
- The hardware and components featured in the Drive shaft,univ.joint/center mounting are specific to the 2500-3.3Li 2800 produced during 1969. These technical specifications ensure that parts like the Bump stop (26111100891) are correctly matched to the vehicle's structural and mechanical requirements.
- How do I find specific parts within the Drive shaft,univ.joint/center mounting assembly?
- Each item in the Drive shaft,univ.joint/center mounting corresponds to the numbered list below the illustration. For the 2500-3.3Li 2800, you can identify the Bump stop by locating its position on the schematic, which then links to the official BMW part number 26111100891 for the Drive Shaft section.